Hologic Panther System - Data Export Management; Delimiter Character for Export Files; Table 105. Data Export Management Options

Panther System
®
Operator’s Manual
AW-17791-001 Rev. 002 (EN)
230
System Administration
A Report Export Directory window opens.
2. From the window, select the desired export destination for the system to use when
exporting reports.
3. Select OK when finished.
Data Export Management
Use the Data Export Management expansion menu to configure the delimiter characters
for exported LIS data and the data export directory.
Select and configure the following options within the menu:
Option Description
Delimiter character for
LIS export files
Select this field to configure the delimiter character
used for exported LIS data.
Additional instructions provided below.
Raw Data Export
Directory
Select this field to adjust the export file destination for
kinetic data and LIS data.
Additional instructions provided below.
Table 105. Data Export Management Options
Delimiter Character for Export Files
To select the delimiter character to use in exported LIS data:
1. From the expanded Data Export Management menu on the System Configuration
screen, select the Delimiter character for export files field.
A Delimiter character for export files window opens.