Hologic Panther System - Data Management Screen

Panther System
®
Operator’s Manual
AW-17791-001 Rev. 002 (EN)
77
Overview
Screen Buttons Description
2. System
Configuration
Select this button to access the System Configuration
screen (see System Configuration Screen on page
79).
3. LIS Configuration Select this button to access the LIS Configuration
screen (see LIS Configuration Screen on page 80).
4. Operator
Management
Select this button to access the Operator
Management screen (see Operator Management
Screen on page 84).
5. Change
Password
Select this button to change the password for the
operator currently logged on to the system (see
Change Password on page 243).
6. Quality Control
Configuration
Select this button to access the Quality Control
Configuration screen (see Quality Control
Configuration Screen on page 85).
7. Reflex Testing
Configuration
Select this button to access the Reflex Testing
Configuration screen (see Reflex Testing
Configuration Screen on page 87).
8. Assay Custom
Cutoff Value
Configuration
Select this button to access the Assay Custom Cutoff
Value Configuration screen (see Assay Custom
Cutoff Value Configuration Screen on page 89).
Table 43. Administration Screen Button Descriptions (Continued)
Data Management Screen
To access the Data Management screen, select the Data Management button on the
Administration screen (see Administration Screen on page 76).
Refer to the Data Management screen for purging the three (3) types of system logs and
the results logs. Use the available buttons on the screen to complete the corresponding
data management tasks.