Panther System
®
Operator’s Manual
AW-17791-001 Rev. 002 (EN)
174
System Operation
Filter Description
Assay Select the Select button to choose an assay type. Only
one (1) assay type can be selected.
Completion Date Select the From field and choose the beginning date of
the range desired. The To field automatically updates to
cover the period one (1) month from the selected date.
Quality Control
Type
Check the Manufacturer's Control/Calibrators cell to
create a report with data from controls or calibrators that
are required by the selected assay type. Check the
External Quality Controls cell to create a report with
data from EQCs that were designated by the site through
the software.
Display multiple
master lots on
the same chart
Select Yes to include data from multiple master lots on
the same Levey-Jennings chart. Select No to separate
the data into multiple charts organized by the master lot
used to process the control or calibrator.
Table 78. Levey-Jennings Report—Report Parameters
To Next Page
Loading...
