Hologic Panther System - Power Requirements; Table 5. Environmental Output; Table 6. Power Requirements

Panther System
®
Operator’s Manual
AW-17791-001 Rev. 002 (EN)
16
Specifications and Requirements
Altitude Operation: Altitude equal to or less than 2,000 m
(6,562 ft) above sea level
Storage: As required for travel
Ambient Temperature Operating: 15–30 °C
Storage: 5–45 °C
Transport: -20–70 °C
Relative Humidity Operating: 20–85% non-condensing
Storage: 10–90% non-condensing
Transport: 10–90% non-condensing
Pollution Degree 2
Installation Class II
Table 4. Environmental Requirements (Continued)
Heat Dissipation 550 watts (1878 BTU/hour) during steady state
Drain Output None: waste fluids drain to removable containers
Noise Output < 60 db (A)
Table 5. Environmental Output
Power Requirements
Voltage 100–240 ± 10% VAC
Frequency 50–60 Hz, 1800 VA single phase
Current Input Minimum of 15 amp circuit (dedicated)
20 amp circuit (dedicated if used with optional UPS)
Table 6. Power Requirements