Hologic Panther System - Reports; Activity Log Report

Panther System
®
Operator’s Manual
AW-17791-001 Rev. 002 (EN)
165
System Operation
Report Type File Name
Lot Search Report LotSearchYYYYMMDD-HHMMSS*.pdf
Maintenance Checklist MaintenanceChecklistYYYYMMDD-
HHMMSS*.pdf
Maintenance Log Report MaintenanceLogYYYYMMDD-
HHMMSS*.pdf
Messages Log Report MessagesYYYYMMDD-HHMMSS*.pdf
Prevalence Report PrevalenceReportYYYYMMDD-
HHMMSS*.pdf
Results by Worklist
Report
ResultsWorklistID-YYYYMMDD-
HHMMSS**.pdf
Results Report ResultsYYYYMMDD-HHMMSS*.pdf
Sample Audit Report SampleYYYYMMDD-HHMMSS*.pdf
Test Count Report TestYYYYMMDD-HHMMSS*.pdf
Worklist Lot Report WorklistWorklistIDYYYYMMDD-
HHMMSS**.pdf
*Where YYYYMMDD-HHMMSS represents the time the report is generated.
**Where YYYYMMDD-HHMMSS represents the time the worklist is created.
Note—If saving to a USB flash drive, wait until the "Update In Progress"
notification clears before removing the USB flash drive to avoid data
corruption (see Removal of a USB Flash Drive on page 156).
Reports
Activity Log Report
Select Activity Log Report and enter the desired date range on the right of the Report
Menu screen to generate an Activity Log Report. Check one of the three (3) cells in the
Creation Date panel to generate a report that contains all activities that were performed
over the selected date range. Once the filter has been updated, select View, Print, or
Export as desired to access the Activity Log Report.