Hologic Panther System - Page 20

Panther System
®
Operator’s Manual
AW-17791-001 Rev. 002 (EN)
xviii
List of Figures
Figure 55. Panther Reagent Rack (Example) 109
Figure 56. Supplemental Reagent Information Window (Example) 111
Figure 57. Supplemental Reagent Information Window—Redundant Lots
(Example) 112
Figure 58. Control/Calibrator Lot Entry Screen (Example) 114
Figure 59. Sample Rack Bay Screen (Example) 114
Figure 60. Panther Sample Rack—With Retainer 117
Figure 61. Sample Defaults Window (Example) 118
Figure 62. Expanded Sample Defaults Window (Example) 120
Figure 63. Select Reagent Lanes Window (Example) 122
Figure 64. Add Test Orders Window (Example) 124
Figure 65. Process as Specimen Checkbox (Example) 127
Figure 66. Status Panel (Example) 137
Figure 67. Temperatures and Sensors Screen (Example) 140
Figure 68. Assay Reagent Loading Screen (Example) 142
Figure 69. Assay Reagents Panel (Example) 142
Figure 70. Test Orders Screen (Example) 143
Figure 71. Run Status Screen (Example) 146
Figure 72. Sample Status Locations (Example) 147
Figure 73. Specimens Loaded Panel—Without LIS (Example) 148
Figure 74. Specimens Loaded Panel—With LIS (Example) 149
Figure 75. Assay Reagents Panel (Example) 150
Figure 76. Results Panel (Example) 150
Figure 77. Results Screen—Expanded (Example) 151
Figure 78. Sample Curve Report (Example) 152
Figure 79. Results Screen with Filters Panel (Example) 155
Figure 80. USB Storage Removal Window (Example) 156
Figure 81. Report Parameters for Results Report (Example) 162
Figure 82. Panther System Report Navigation Bar 163