Hologic Panther System - Page 419

Panther System
®
Operator’s Manual
AW-17791-001 Rev. 002 (EN)
392
Appendix C. System Messages
Code Message Possible Cause Solution
407.012.00005 Default cutoff for
assay {0}, cutoff {1}
was set to value '
{2}' and to always
use default
Operator made
changes to cutoff
that is set to always
use default cutoffs.
No action necessary.
407.012.00006 Default cutoff for
assay {0}, cutoff {1}
was set to value '
{2}' and to ask at kit
load
Changes were
made to the cutoff.
No action necessary.
407.012.00008 Manufacturer
Control and
Calibrator overrides
edited
The manufacturer
quality
controls/calibrators
were edited.
No action necessary.
407.013.00001 Cleared {0}
message(s)
The operator
selected clear
selected message.
No action necessary.
407.013.00002 Cleared all
messages
The operator
selected clear all
messages.
No action necessary.
407.013.00003 Send Logs
executed
The operator
selected send logs.
No action necessary.
Table 118. System Messages (Continued)