Panther System
®
Operator’s Manual
AW-17791-001 Rev. 002 (EN)
19
Specifications and Requirements
Format
Code 39 (checksum optional), Code 128
(ISBT 128), Codabar (checksum optional),
Interleaved 2 of 5 (checksum optional), JAN13
(checksum optional), Code 93 (checksum
optional), NW7, UPC (checksum optional)
Number of Characters 4–20
Allowed Characters
7-bit ASCII characters hexadecimal reference
numbers 33–126, excluding those noted in
the table below. No spaces or commas. The
full list of allowable characters is shown in
Table 10.
Note—Spaces before, after, or within the
barcode are not accepted by the system.
Feature Size 6.5–12 mil (0.160–0.305 mm)
Print Resolution Minimum 300 dpi, recommended 600 dpi
Print Contrast Signal ≥ 0.6
Quality ANSI X3.182 grade C or higher
Table 9. Barcode Requirements (Continued)
To Next Page
Loading...
