. . . . .
INTRODUCTION TO MAXPRO NVR
MAXPRO NVR Features
MAXPRO NVR 5.0 Installation and Configuration Guide 33
In Fresh Installation Scenario
In case of Fresh Installation, the following are the recommendations:
• Only default username is displayed and the password field will be blank
• User must create new password
• In Create New Password dialog box, leave the Old Password field blanks and
proceed.
UI Improvements
For better user experience and accessibility the following features are rearranged in Systems
tab
• Archival Schedule
• In camera level added after 30 minutes (s) as a new entry.
• Edge Sync Settings
• Privacy Protection Settings
Improvements in Status Monitor
• Additional status message Database Connection lost is included. This will help user
to know the status of database connection.
• Color Indications:
• Green: Everything is Fine
• Blinking between Yellow and Green: Not Recording
• Blinking between Yellow and Red: Database Connection Lost
System and Performance Improvements
• There is no Metadata from 5.0 Release onwards.
• No separate drive is required for Metadata
• New Recording file system with no Index files except PassIndex is introduced
and it is for per camera and per drive.
• Plug-in a new recording drive which can have recordings of another 5.0 NVR,
and play the same recordings by adding the same Unique Number of the
camera.
• Supports backward compatibility (5.0 version can play till 4.9 version recordings
(With Metadata) including 5.0 recordings). No recording loss in user’s
perspective.
• Recording, Retrieval and Recycle features will have no dependency on index
files.
• PassIndex only use as catalyst
• New naming convention for Segment files (Num_StartTime_EndTime)
• Access recordings directly from recording drive
• Each recording drive is self sufficient
• XML Corruption recovery
• Auto recovery of corrupted XMLs by NEO on the run
• No functionality loss
To Next Page
Loading...
