EasyManua.ls Logo

Honeywell MAXPRO NVR Series - Page 34

Honeywell MAXPRO NVR Series
360 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
INTRODUCTION TO MAXPRO NVR
MAXPRO NVR Features
34 MAXPRO NVR 5.0 Installation and Configuration Guide
1
Integrity Service Settings
This is a new a service that runs in background and ensure all system data to be
synchronized. Following are the features this service provides as part of 5.0 release.
1. Delete Orphan Data: In this feature, system will find and clean up orphan clips from file
system or DB. Orphan data will be identified based on camera configured deletion
settings.
2. Drive Feature: In this feature, Drive Full Scan is performed until a new fixed drive is
detected in NVR system. Based on the scan result, data sync up or orphan data clean up
process is initiated using the current camera configuration or if the camera is not found
then, by default the data after 30 days will be deleted..
For Example: If NVR 1 is down due to some technical issues, then the hard disk of NVR 1
can be used in NVR2. NVR2 initiates the scan, detects the drives and displays the
recordings of NVR 1.
Running on schedule base is same as windows scheduler.
Has capability to process deleted camera’s data for Orphan deletion.
3. Schedule of when to start the service can be configured.
4. Allows Neo to recycle data first (since by default it deletes clips with retention period + 24
hours)
New EquIP 1080p and 4MP Camera Integration
1. Configuration is done through Honeywell proprietary ISOM APIs
2. After integrating the new EquIP Camera, system will be able to perform the following
H.264, H.265 and MJPEG coded support
HTTPS support
3. New events supported: With the EquIP series camera integration the following events are
generated.
Abandoned Object detection
Object Missing detected
Trigger Line detection
The following EquIP series Camera models are supported using ISOM API’s
# Camera Model Description Firmware Details
1 H4L2GR1V 2MP Lowlight outdoor dome Version: 1.000.0000.8, Build Date: 2018-03-
16
VA Package
Version: 1.0.7_build20180315
ISOM Version: 1.2.1_build20180316
2 HBL2GR1V 2MP Lowlight IR bullet
3 HCL2GV 2MP Lowlight box camera

Table of Contents

Related product manuals