HP 420

General System Configuration
Configuring SNMP
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
sysSystemUp – The access point is up and running.
(Object ID: 1.3.6.1.4.1.11.2.14.11.6.4.1.1.7.4.2.17)
sysSystemDown – The access point is about to shutdown and
reboot. (Object ID: 1.3.6.1.4.1.11.2.14.11.6.4.1.1.7.4.2.18)
sysRadiusServerChanged – The access point has changed from the
primary RADIUS server to the secondary, or from the secondary to
the primary. (Object ID: 1.3.6.1.4.1.11.2.14.11.6.4.1.1.7.4.2.19)
sysConfigFileVersionChanged – The access point’s software file
has been changed.
(Object ID: 1.3.6.1.4.1.11.2.14.11.6.4.1.1.7.4.2.20)
hpdot11StationAssociation – A client station has successfully
associated with the access point.
(Object ID: 1.3.6.1.4.1.11.2.14.11.6.4.1.1.7.4.2.1)
hpdot11StationReAssociation – A client station has successfully
re-associated with the access point.
(Object ID: 1.3.6.1.4.1.11.2.14.11.6.4.1.1.7.4.2.2)
hpdot11StationAuthentication – A client station has been
successfully authenticated.
(Object ID: 1.3.6.1.4.1.11.2.14.11.6.4.1.1.7.4.2.3)
hpdot11StationRequestFail – A client station has failed associa-
tion, re-association, or authentication.
(Object ID: 1.3.6.1.4.1.11.2.14.11.6.4.1.1.7.4.2.4)
hpdot11InterfaceFail – The 802.11g interface has failed.
(Object ID: 1.3.6.1.4.1.11.2.14.11.6.4.1.1.7.4.2.5)
dot1xMacAddrAuthSuccess – A client station has successfully
authenticated its MAC address with the RADIUS server.
(Object ID: 1.3.6.1.4.1.11.2.14.11.6.4.1.1.7.4.2.6)
dot1xMacAddrAuthFail – A client station has failed MAC address
authentication with the RADIUS server.
(Object ID: 1.3.6.1.4.1.11.2.14.11.6.4.1.1.7.4.2.7)
dot1xAuthNotInitiated – A client station did not initiate 802.1X
authentication. (Object ID: 1.3.6.1.4.1.11.2.14.11.6.4.1.1.7.4.2.8)
dot1xAuthSuccess – A 802.1X client station has been successfully
authenticated by the RADIUS server.
(Object ID: 1.3.6.1.4.1.11.2.14.11.6.4.1.1.7.4.2.9)
dot1xAuthFail – A 802.1X client station has failed RADIUS authen-
tication. (Object ID: 1.3.6.1.4.1.11.2.14.11.6.4.1.1.7.4.2.10)
localMacAddrAuthSuccess – A client station has successfully
authenticated its MAC address witht the local database on the access
point. (Object ID: 1.3.6.1.4.1.11.2.14.11.6.4.1.1.7.4.2.11)
5-34