Using the HP Web Browser Interface
Status Reporting Features
To display the current database of detected neighbor APs, enter the CLI
command shown in the following example.
HP420#show ap-detection table
5 Number of APs detected : 16:22, 05/10/2005
BSSID: 00-04-e2-2a-37-3d SSID: ANY
RSSI: 7 Channel: 7
Radio-mode: 11b Adhoc: No
Security: No Encryption Life-time:900
BSSID: 00-04-e2-2a-37-3e SSID: tps19
RSSI: 12 Channel: 11
Radio-mode: 11b Adhoc: No
Security: Static WEP Life-time:900
BSSID: 00-30-f1-be-69-77 SSID: Spiderman
RSSI: 47 Channel: 10
Radio-mode: 11g Adhoc: No
Security: mCast:WEP-104/uCast:TKIP/psk 1x Life-time:820
BSSID: 00-0d-9d-c6-d8-8b SSID: WLAN1AP
RSSI: 18 Channel: 6
Radio-mode: 11g Adhoc: No
Security: mCast:WEP-104/uCast:TKIP/1x Life-time:900
BSSID: 00-11-85-ff-62-cd SSID: WLAN1AP
RSSI: 15 Channel: 1
Radio-mode: 11g Adhoc: No
Security: mCast:WEP-104/uCast:TKIP/1x Life-time:840
HP420#
4-30
To Next Page
Loading...
