Changing dependent options after applying a profileChanging dependent options after applying a profile
There may be one or more dependent options that you want to change in your Workload Profile. Dependent options cannot be changed
for a predefined profile. You can change the dependent options in Custom mode. When you are in Custom mode, your deployment is no
longer in profile mode and you can manually adjust option settings. When you enter Custom mode, all the settings from the previously
applied profile are shown.
The easiest way to change dependent settings is to modify an applied profile. First apply a Workload Profile that has most of the
settings that you want to use then change to Custom mode. Then change only the settings you want to have new values.
PrerequisitesPrerequisites
Apply a Workload Profile before you do this task.
ProcedureProcedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Workload Profile.
2. Select the Custom profile option.
All of the settings from the previously applied Workload Profile are shown. All options are editable.
3. Change the options that you want to have new values.
4. Save and reboot to apply the changes.
To Next Page
Loading...
