Enabling AMD Virtualization TechnologyEnabling AMD Virtualization Technology
If enabled, a hypervisor or operating system supporting this option can use hardware capabilities provided by AMD VT. You can leave
this set to Enabled even if you are not using a hypervisor or an operating system that uses this option.
NOTE:NOTE:
This option is available for all AMD Gen10 servers and AMD Gen10 Plus servers running ROM version 1.38 or earlier.
However, for AMD Gen10 Plus servers with ROM version 2.40 and later, AMD IOMMU and AMD Virtualization
Technology have been combined into a single new setting called AMD I/O Virtualization Technology .
ProcedureProcedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Virtualization Options >
AMD Virtualization Technology.
2. Select one of the following:
Enabled
Disabled
3. Save your setting.
To Next Page
Loading...
