Enabling or disabling Wake-On LANEnabling or disabling Wake-On LAN
Use the Wake-On LAN option to enable or disable the ability of the server to power on remotely using a WOL-capable NIC.
PrerequisitePrerequisite
A WOL-capable NIC, NIC driver, and operating system.
NOTE:NOTE:
If you enable this option, remove all power cords before adding or removing any adapters. Some adapters can cause the
system to power on when added or removed.
ProcedureProcedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > System Options > Server
Availability > Wake-On LAN.
2. Select a setting.
Enabled
Disabled
3. Save your setting.
To Next Page
Loading...
