Selecting advanced PCIe device settingsSelecting advanced PCIe device settings
ProcedureProcedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > PCIe Device Configuration >
Advanced PCIe Configuration.
2. Select settings.
NVMe PCIe Resource Padding —Configures PCIe resources to support PCIe hot-add for NVMe drives.
Normal—Only allocates PCIe resources to devices installed at boot time. PCIe hot-add is not supported.
Medium—Allocates additional PCIe resources for each PCIe root port, which might enable a PCIe hot-add event to work
without requiring a system reboot to enumerate the device.
High—Allocates a maximum amount of PCIe resources to allow for the best chance of supporting a PCIe hot-add event.
Maximum PCI Express Speed—When Workload Profile is set to Custom, sets the maximum speed at which the server allows PCI
Express devices to operate.
Per Port Control
PCIe Generation 1.0
3. Save your settings.
To Next Page
Loading...
