Setting the IPv6 DHCP Unique Identifier methodSetting the IPv6 DHCP Unique Identifier method
Use the IPv6 DHCP Unique Identifier option to control how the IPv6 DHCP Unique Identifier (DUID is set.
ProcedureProcedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Network Options > Network
Boot Options > IPv6 DHCP Unique Identifier .
2. Select a setting.
Auto—Sets the DUID using the Universal Unique Identifier (UUID) of the server or, if the server is not available, the Link-Layer
Address Plus Time (DUID-LLT) method.
DUID-LLT—Sets the DUID using the Link-Layer Address Plus Time (DUID-LLT) method.
3. Save your changes.
To Next Page
Loading...
