HP ProLiant Gen10 - Enabling or Disabling the BIOS Serial Console Port

Enabling or disabling the BIOS Serial Console PortEnabling or disabling the BIOS Serial Console Port
Use the BIOS Serial Console Port option to redirect video and keystrokes through the serial port to operating system boot.
NOTE:NOTE:
This option can interfere with nonterminal devices attached to the serial port. In such cases, set this option to disabled.
NOTE:NOTE:
This option is only supported in English language mode when running in the UEFI preboot System Utilities.
ProcedureProcedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > BIOS Serial Console and
EMS Options > BIOS Serial Console Port.
2. Select a setting.
Auto
Physical Serial Port
Virtual Serial Port
3. Save your setting.
Enabling or disabling the BIOS Serial Console Port 132