HP ProLiant Gen10 - Setting USB Control

Setting USB ControlSetting USB Control
Use the USB Options option to configure how USB ports and embedded devices operate at startup.
ProcedureProcedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > System Options > USB
Options > USB Control.
2. Select a setting.
All USB Ports Enabled—Enables all USB ports and embedded devices.
All USB Ports Disabled—Disables all USB ports and embedded devices.
External USB Ports Disabled—Disables external USB ports.
Internal USB Ports Disabled—Disables internal USB ports.
3. Save your setting.
Setting USB Control 127