Setting the embedded storage boot policySetting the embedded storage boot policy
Use the Embedded Storage Boot Policy option to select the UEFI BIOS boot targets for embedded storage controllers. By default, all
valid boot targets attached to the storage controller are available to the UEFI Boot Order list.
PrerequisitesPrerequisites
Boot Mode is set to UEFI Mode.
ProcedureProcedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Storage Options >
Embedded Storage Boot Policy.
2. Select a storage controller.
3. Select a setting.
Boot All Targets—All valid boot targets attached to the storage controller are available to the UEFI Boot Order list.
Boot Limit to 24 Targets —A maximum of 24 boot targets attached to the storage controller are available to the UEFI Boot
Order list.
Boot No Targets—No boot targets attached to the storage controller are available to the UEFI Boot Order list.
4. Save your setting.
To Next Page
Loading...
