HP ProLiant Gen10 - Setting the Minimum Processor Idle Power Package C-State

Setting the Minimum Processor Idle Power Package C-StateSetting the Minimum Processor Idle Power Package C-State
Use the Minimum Processor Idle Power Package C-State option to configure the lowest processor idle power state (C-State). The
processor automatically transitions into package C-States based on the C-States in which cores on the processor have transitioned. The
higher the package C-State, the lower the power usage of that idle package state.
PrerequisitePrerequisite
Workload Profile is set to Custom.
ProcedureProcedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Power and Performance
Options > Minimum Processor Idle Power Package C-State .
2. Select a setting.
Package C6 (retention) State (default—lowest)
Package C6 (non-retention) State
No Package State
3. Save your setting.
Setting the Minimum Processor Idle Power Package C-State 257