Setting the ASR timeoutSetting the ASR timeout
PrerequisitePrerequisite
ASR Status is enabled. Use the ASR Timeout option to set the time to wait before rebooting the server if an operating system crash or
server lockup occurs. When the server has not responded in the selected amount of time, the server automatically reboots.
ProcedureProcedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > System Options > Server
Availability > ASR Timeout.
2. Select a wait time.
5 Minutes
10 Minutes
15 Minutes
20 Minutes
30 Minutes
3. Save your setting.
NOTE:NOTE:
The ASR timeout option is only supported in ProLiant Gen10 servers.
To Next Page
Loading...
