Managing power settingsManaging power settings
The power management features do not apply to NVM Express SmartRAID SW RAID Support.
ProcedureProcedure
1. From the System Utilities screen, select System Configuration >
controller
> Configure Controller Settings > Manage Power
Settings.
2. In the Manage Power Settings screen, update any of the following settings.
SettingSetting DescriptionDescription
Power
Mode
Options are:
Maximum performance (default)—Power savings options that affect performance are disabled.
Balanced—Use this setting to save power with minimal effects on performance.
Minimum power—When settings are selected without regard to system performance, maximum power savings is
achieved.
NOTE:NOTE:
Hewlett Packard Enterprise recommends the minimum power setting for specific applications, but it is not
appropriate for most customers. Most applications will suffer significant performance reduction.
Survival
Mode
Allows controller to throttle back dynamic power settings to minimum when temperature exceeds the threshold. This
minimum setting allows the server to run in most situations, but performance might decrease.
3. Click Submit changes .
To Next Page
Loading...
