Enabling or disabling Network Boot Retry SupportEnabling or disabling Network Boot Retry Support
Use the Network Boot Retry Support option to enable or disable the network boot retry function. When enabled, the system BIOS
attempts to boot the network device up to the number of times set in the Network Boot Retry Count option before attempting to boot
the next network device. This setting only takes effect when attempting to boot a network device from the F12 function key and one-
time boot options.
ProcedureProcedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Network Options > Network
Boot Options > Network Boot Retry Support .
2. Select a setting.
Enabled—Enables network boot retry.
Disabled—Disables network boot retry.
3. Save your changes.
To Next Page
Loading...
