HP ProLiant Gen10 - Adding the Embedded UEFI Shell to the UEFI Boot Order List

Adding the Embedded UEFI Shell to the UEFI Boot Order listAdding the Embedded UEFI Shell to the UEFI Boot Order list
PrerequisitePrerequisite
Boot Mode is set to UEFI Mode.
ProcedureProcedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Embedded UEFI Shell > Add
Embedded UEFI Shell to Boot Order.
2. Select a setting.
Enabled—Adds the embedded UEFI Shell to the boot order list on the next reboot.
Disabled—The embedded UEFI Shell is not added to the boot order list.
3. Save your setting.
Adding the Embedded UEFI Shell to the UEFI Boot Order list 300