Cannot download the file in the network boot URLCannot download the file in the network boot URL
SymptomSymptom
You see an error message when you try to download the file in the URL you specified for a network boot.
Solution 1Solution 1
CauseCause
The network URL you specified during static configuration are incorrect.
ActionAction
1. Use the Embedded UEFI Shell ping command to check the network connection. See “Ping” in the UEFI Shell user guide.
2. Change your static network connection settings and try to download the file in URL again.
Solution 2Solution 2
CauseCause
The DHCP server did not respond.
ActionAction
1. Ensure that there is a DHCP server available and it is operational.
2. Try to download the file in the URL again.
Solution 3Solution 3
CauseCause
No cable is connected to the selected NIC port.
ActionAction
1. Ensure that there is a cable connection.
2. Try to download the URL again.
Solution 4Solution 4
CauseCause
The file is incorrect or not present on the server, or it cannot be downloaded due to insufficient privileges. Check the file name and
that it exists on the server. Make sure that you have admin privileges on the server.
ActionAction
1. Ensure that the file is present, and that you are using the correct file name and have sufficient privileges to download it.
2. Try to download the file in the URL again.
Solution 5Solution 5
CauseCause
The HTTP or FTP server is down or did not respond.
ActionAction
1. Ensure that the HTTP or FTP server you specified is available and that it is operational.
2. Try to download the file in the URL again.
To Next Page
Loading...
