HP ProLiant Gen10 - Adding an Iscsi Initiator Name

Adding an iSCSI initiator nameAdding an iSCSI initiator name
Use the iSCSI Initiator Name option to set a name for the iSCSI initiator using iSCSI Qualified Name (IQN) format. EUI format is not
supported. This option replaces the default name set for the initiator.
ProcedureProcedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Network Options > iSCSI
Boot Configuration > iSCSI Initiator Name.
2. Enter a unique name for the iSCSI initiator using iSCSI Qualified Name (IQN) format. For example: iqn.2001–04.com.examp
le:uefi-13021088
This setting is saved automatically.
Adding an iSCSI initiator name 227