HP ProLiant Gen10 - Setting the Boot Order Policy

Setting the boot order policySetting the boot order policy
Use the Boot Order Policy option to control the system behavior when attempting to boot devices per the UEFI Boot Order list and no
bootable device is found.
ProcedureProcedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Boot Options > Boot Order
Policy.
2. Select a setting.
Retry Boot Order Indefinitely —The system continuously attempts the boot order until a bootable device is found.
Attempt Boot Order Once —The system attempts to execute all items in the boot menu once, and halts the system.
Reset After Failed Boot Attempt —The system attempts to execute all items once, and reboots the system.
3. Save your setting.
Setting the boot order policy 208