Setting the Embedded iPXE startup script locationSetting the Embedded iPXE startup script location
Use the iPXE Auto-Start Script Location option to select the location of the Embedded iPXE startup script. When iPXE Script Auto-Start
is enabled, this setting specifies where the Embedded iPXE looks for the startup script file.
PrerequisitesPrerequisites
Embedded iPXE is enabled.
iPXE Script Auto-Start is enabled
ProcedureProcedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Network Options >
Embedded iPXE > iPXE Auto-Start Script Location .
2. Select a setting:
Auto: The Embedded iPXE attempts to retrieve the startup script from the network location first, followed by locally attached
media.
File Systems on Attached Media : The Embedded iPXE looks for the Startup.ipxe script file on a UEFI-accessible local file system,
such as a FAT32 partition on a USB disk, an iLO virtual drive, or HDD.
Network Location: The Embedded iPXE executes the .ipxe script pointed by the URL specified in this setting.
3. Save your setting.
To Next Page
Loading...
