HP ProLiant Gen10 - Enabling or Disabling Backup ROM Image Authentication

Enabling or disabling backup ROM image authenticationEnabling or disabling backup ROM image authentication
Use the Backup ROM Image Authentication option to enable or disable cryptographic authentication of the backup ROM image on
startup.
ProcedureProcedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Server Security > Backup
ROM Image Authentication.
2. Select a setting.
Enabled—The backup ROM image is authenticated on startup.
Disabled—The backup ROM image is not authenticated on startup. Only the primary image is authenticated.
3. Save your changes.
Enabling or disabling backup ROM image authentication 369