Setting the network location for the Shell auto-start scriptSetting the network location for the Shell auto-start script
PrerequisitesPrerequisites
Embedded UEFI Shell is enabled.
Shell Auto-Start Script Location is set to Network Location or Auto.
Discover Shell Auto-Start Script using DHCP is disabled.
When specifying and HTTPS URL, the TLS certificate of the HTTPS server is configured using Server Security > TLS (HTTPS)
Options.
ProcedureProcedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Embedded UEFI Shell >
Network Location for Shell Script-Auto Start .
2. Enter the network location of the .nsh file. Valid values are:
An HTTP/HTTPS URL for either an IPv4 or IPv6 server address or host name.
An FTP URL for either an IPv4 or IPv6 server address or host name.
ExamplesExamples:
http://192.168.0.1/file/file.nsh
http://example.com/file/file.nsh
https://example.com/file/file.nsh
http://[1234::1000]/file.nsh
3. Save your setting.
To Next Page
Loading...
