Configuring EMS Console port settingsConfiguring EMS Console port settings
Use the EMS Console port settings option to configure the ACPI serial port setting, which includes the ability to redirect the Windows
Server Emergency Management console (EMS) through either the physical or virtual serial port.
EMS configuration options have changed. See your product documentation for details.
NOTE:NOTE:
Not all BAUD rates are supported by an Operating System for Serial Port Redirection (EMS). Consult operating system
documentation for supported modes.
ProcedureProcedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > System Options > BIOS
Serial Console & EMS > EMS Console.
2. Select either a physical or virtual port setting.
3. Save your setting.
To Next Page
Loading...
