HP ProLiant Gen10 - Setting the Maximum Memory Bus Frequency

Setting the maximum memory bus frequencySetting the maximum memory bus frequency
Use the Maximum Memory Bus Frequency option to configure the system to run memory at a lower maximum speed than that
supported by the installed processor and DIMM configuration.
PrerequisitePrerequisite
Workload Profile is set to Custom.
ProcedureProcedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Memory Options >
Maximum Memory Bus Frequency.
2. Select a setting.
Auto—Memory runs at the maximum speed supported by the system configuration.
2933 MHz
2667 MHz
2400 MHz
2133 MHz
1867 MHz
NOTE:NOTE:
The AMD servers does not support 1867 and 2133 MHz system configurations.
3. Save your setting.
Setting the maximum memory bus frequency 174