Setting TPM FIPS Mode Switch OperationSetting TPM FIPS Mode Switch Operation
If you want TPM 1.2 mode to be FIPS-ready through POST, use the TPM FIPS Mode Switch Operation option. By default, TPM 2.0 mode
is FIPS-ready through POST.
PrerequisitesPrerequisites
Your operating system supports TPM 1.2 Federal Information Processing Standard (FIPS) mode.
Trusted Platform Module TPM Mode Switch setting is set to 1.2, FIPS.
ProcedureProcedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Server Security > Trusted
Platform Module options > TPM FIPS Mode Switch Operation.
2. Select a setting.
No Action—No mode is set.
Regular mode—TPM does not operate in FIPS mode.
FIPS mode—TPM operates using the Federal Information Processing Standard.
3. Save your setting.
To Next Page
Loading...
