Configuring AMD NBIO LCLK DPM LevelConfiguring AMD NBIO LCLK DPM Level
ProcedureProcedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Power and Performance
Options > I/O Options > NBIO LCLK DPM Level .
2. Select a value:
Auto
Static Low
Static High
NOTE: NOTE: Configuring the NBIO to Static High may improve performance on PCIe devices on the NBIO but will
reduce performance in other portions of the processor. This setting should only be used after a review of PCIe
device requirements
3. Save your setting.
To Next Page
Loading...
