HP ProLiant Gen10 - Enabling or Disabling ASR

Enabling or disabling ASREnabling or disabling ASR
PrerequisitePrerequisite
The System Management driver is loaded.
Use the ASR Status option to enable or disable Automatic Server Recovery, which automatically reboots the server if the server locks
up.
ProcedureProcedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > System Options > Server
Availability > ASR Status.
2. Select a setting.
Enabled
Disabled
3. Save your setting.
NOTE:NOTE:
The ASR status option is only supported in ProLiant Gen10 servers.
Enabling or disabling ASR 137