Configuring NVDIMM-N OptionsConfiguring NVDIMM-N Options
ProcedureProcedure
1. From the System Utilities screen, select System ConfigurationSystem Configuration > BIOS/Platform Configuration (RBSU)BIOS/Platform Configuration (RBSU) > Memory OptionsMemory Options >
Persistent Memory OptionsPersistent Memory Options > NVDIMM-N OptionsNVDIMM-N Options.
2. Select EnabledEnabled or DisabledDisabled for the following options:
NVDIMM-N Support
NVDIMM-N Interleaving
NVDIMM-N Sanitize/Erase on Next Reboot Policy
IMPORTANT:IMPORTANT:
Sanitizing/Erasing an NVDIMM-N results in the loss of allall user data saved in the NVDIMM-N. Hewlett Packard
Enterprise strongly recommends that you perform a manual backup of all user data in the NVDIMM-Ns before
sanitizing/erasing the NVDIMM-Ns.
Sanitize/Erase all NVDIMM-N in the System
Sanitize/Erase all NVDIMM-N on Processor —These menu items differ based on your server configuration.
Sanitize/Erase Processor 1 DIMM 2 —These menu items differ based on your server configuration.
3. Save your changes.
To Next Page
Loading...
