HP ProLiant Gen10 - Enabling or Disabling Pcie Slot Network Boot

Enabling or disabling PCIe Slot Network BootEnabling or disabling PCIe Slot Network Boot
Use the PCIe Slot Network Boot option to enable or disable UEFI network boot for NIC cards in PCIe slots.
ProcedureProcedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Network Options > Network
Boot Options > PCIe Slot Network Boot .
2. Select a PCIe slot entry.
3. Select a setting.
Enabled—Enables UEFI network boot for NIC cards in PCIe slots.
Disabled—Disables UEFI network boot for NIC cards in PCIe slots.
4. Save your changes.
Enabling or disabling PCIe Slot Network Boot 220