Changing Backup and Restore settingsChanging Backup and Restore settings
Backup files include serial numbers and product ID information. When you restore from a backup, you are prompted whether you want
to apply this information to the system or not. If you are using the backup to set up a new system, you can skip restoring the serial
number and product ID.
To change device encryption settings, go to System Configuiration > BIOS/Platform Configuration (RBSU) > Server Security > Device
Encryption Options > Device Encryption Migration Options .
ProcedureProcedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > System Default Options >
Backup and Restore Settings.
2. Select one of the following:
a. Backup
b. Restore
3. Follow the instructions to navigate to the location of a backup file, or where you want to create a backup file.
NOTE:NOTE:
If you are restoring a backup, the backup file must be a .json or .zip file.
4. Click Start Operation.
To Next Page
Loading...
