HP ProLiant Gen10 - Setting up Server Configuration Lock

Setting up Server Configuration LockSetting up Server Configuration Lock
ProcedureProcedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Server Security > Server
Configuration Lock Settings > Setup Server Configuration Lock .
2. Select the following:
Exclude system board.
Exclude DIMMs.
Exclude CPUs.
Exclude PCIe slots.
Exclude security configuration.
Exclude system fimware revisions.
3. To create a digital fingerprint, click Generate Server Configuration Lock Digital Fingerprint .
4. Save the settings.
Setting up Server Configuration Lock 316