HP ProLiant Gen10 - Enabling or Disabling Embedded Ipxe Script Verification

Enabling or disabling Embedded iPXE script verificationEnabling or disabling Embedded iPXE script verification
PrerequisitesPrerequisites
Boot Mode is set to UEFI Mode.
Embedded iPXE is enabled.
iPXE Script Auto-Start is enabled
Secure Boot is enabled.
Embedded iPXE scripts are enrolled in the Secure Boot database.
ProcedureProcedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Network Options >
Embedded iPXE > iPXE Script Verification .
2. Select a setting.
Enabled— Enables iPXE script verification.
Disabled— (Default) Does not enable iPXE script verification.
3. Save your setting.
Enabling or disabling Embedded iPXE script verification 236