Disabling key managementDisabling key management
Disabling key management disables encryption for all encrypted HPE Persistent Memory modules in the server. To disable encryption
only for a single or specific HPE Persistent Memory modules, see Disabling encryption for a HPE Persistent Memory module.
IMPORTANT:IMPORTANT:
Be sure to observe all pop-up messages displayed in UEFI System Utilities that pertain to persistent memory. Failure to
follow the instructions in these messages might cause persistent memory data loss.
ProcedureProcedure
1. From the System Utilities screen, select System ConfigurationSystem Configuration > BIOS/Platform Configuration (RBSU)BIOS/Platform Configuration (RBSU) > Server SecurityServer Security > DeviceDevice
Encryption OptionsEncryption Options.
2. Select the Key Management setting, and change it to Disabled.
3. Press the F12F12 key to save and exit.
4. Reboot the server.
To Next Page
Loading...
