Viewing the status of Viewing the status of HPE Persistent Memory modulesHPE Persistent Memory modules
ProcedureProcedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Server Security > Device
Encryption Options > Device Encryption Status .
The Device Encryption Status screen displays the name, encryption status, and the password of each HPE Persistent Memory
module in the server.
2. Review the status for each HPE Persistent Memory module:
Not encrypted—The HPE Persistent Memory module is not encrypted.
Local/TPM—The HPE Persistent Memory module is encrypted with local key management and the password is displayed.
Make note of this password and store it securely. Hewlett Packard Enterprise recommends downloading the password file to a
USB drive for backup purposes.
Unknown key:
An encrypted HPE Persistent Memory module from another server was installed, and not yet migrated.
The Restore Manufacturing Default Options was selected in UEFI System Utilities.
The HPE TPM has failed.
To Next Page
Loading...
