Setting the Embedded UEFI Shell startup script locationSetting the Embedded UEFI Shell startup script location
Use the Shell Auto-Start Script Location option to select the location of the Embedded UEFI Shell startup script. When UEFI Shell Script
Auto-Start is enabled, this setting specifies where the Shell looks for the startup.nsh file.
PrerequisitesPrerequisites
Embedded UEFI Shell is enabled.
UEFI Shell Script Auto-Start is enabled.
ProcedureProcedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Embedded UEFI Shell >
Shell Auto-Start Script Location.
2. Select a setting.
Auto—The Shell attempts to retrieve the startup script from the network location first, followed by locally attached media.
File Systems on Attached Media —The Shell looks for the startup.nsh script file on a UEFI-accessible local file system, such
as a FAT32 partition on a USB disk or HDD.
Network Location—The Shell looks for a .nsh script at an HTTP/HTTPS or FTP location accessible to the system.
3. Save your setting.
To Next Page
Loading...
