Selecting the BIOS Serial Console Emulation ModeSelecting the BIOS Serial Console Emulation Mode
Use the BIOS Serial Console Emulation Mode option to select the emulation mode type. To match the emulation you will use in your
serial terminal program, such as HyperTerminal or PuTTY, select this option. The BIOS emulation mode must match the mode selected
in your terminal program.
ProcedureProcedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > System Options > BIOS
Serial Console & EMS > BIOS Serial Console Emulation Mode .
2. Select a setting.
VT100
ANSI
VT100+
VT-UTF8
3. Save your setting.
To Next Page
Loading...
