HP ProLiant Gen10 - Setting the IPMI Watchdog Timer Policy

Setting the IPMI Watchdog Timer policySetting the IPMI Watchdog Timer policy
Use the IPMI Watchdog Timer Policy to configure the timeout action upon expiration of the watchdog timer due to a server lockup.
ProcedureProcedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > System Options > Server
Availability > IPMI Watchdog Timer Policy .
2. Select a setting:
Power Cycle
Power Down
Warm Boot
3. Save your setting.
Setting the IPMI Watchdog Timer policy 148