Clearing the controller configurationClearing the controller configuration
Clearing the controller configuration destroys the controller metadata, including array configurations and partition information.
CAUTION:CAUTION:
When you clear the controller configuration, all data on the attached media is no longer accessible and cannot be
recovered.
ProcedureProcedure
1. From the System Utilities screen, select System Configuration >
controller
> Configure Controller Settings > Clear Configuration.
2. In the Clear Configuration screen, select one or both of the following:
Delete All Array Configurations —deletes all the arrays in the controller. All the data in the arrays is also deleted.
Delete Configuration Metadata on All Physical Drives —deletes RAID metadata on the drives that are not part of the array.
To Next Page
Loading...
