Editing a logical driveEditing a logical drive
ProcedureProcedure
1. From the System Utilities screen, select System Configuration >
controller
> Array Configuration > Manage Arrays >
array
> List
Logical Drives >
logical drive
> Edit Logical Drive.
2. In the Edit Logical Drive screen, edit any of the following settings.
SettingSetting DescriptionDescription
Acceleration
method
Acceleration method can increase database performance by writing data to the cache memory instead of directly
to the logical drives. Options are:
Controller cache--writes data to the cache memory.
None--disables caching to reserve the cache module for other logical drives on the array.
Logical drive
label
This label value appears in the Logical Drive Details screen. The label can contain alphanumeric characters and
spaces only.
3. Click Submit Changes.
To Next Page
Loading...
