Setting the PCIe storage boot policySetting the PCIe storage boot policy
PrerequisitePrerequisite
Boot Mode is set to UEFI Mode.
Use the PCIe Storage Boot Policy option to select the UEFI BIOS boot targets for storage controllers in PCIe slots.
NOTE:NOTE:
This setting overrides the Fibre Channel/FCoE Scan Policy setting for Fibre Channel controllers in PCIe slots.
ProcedureProcedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Storage Options > PCIe
Storage Boot Policy.
2. Select a storage controller.
3. Select a boot target.
4. Save your setting.
To Next Page
Loading...
