HP ProLiant Gen10 - Setting the Minimum Processor Idle Power Core C-State

Setting the minimum processor idle power core C-StateSetting the minimum processor idle power core C-State
Use the Minimum Processor Idle Power Core C-State option to select the lowest idle power (C-State) of the processor that the operating
system uses. The higher the C-State, the lower the power usage of that idle state.
PrerequisitePrerequisite
Workload Profile is set to Custom.
ProcedureProcedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Power and Performance
Options > Minimum Processor Idle Power Core C-State .
2. Select a setting.
C6 State (default—lowest)
C3 State
C1E State
No C-states
3. Save your setting.
Setting the minimum processor idle power core C-State 256